Comprobar el estado del RAID usando Storman

En anteriores entradas te hemos explicado cómo instalar en tu servidor dedicado el software Storman para monitorizar tarjetas RAID de Adaptec.

En esta entrada te vamos a explicar cómo revisar el estado del RAID desde el servidor.

Para ver la información y el estado del RAID puedes utilizar uno de estos comandos:

asm GETCONFIG 1 AL

O

cd /usr/Storman
 ./arcconf GETCONFIG 1 AL

El resultado depende de los discos que tienes instalados en el servidor y del tipo de RAID. Será algo parecido a esto:

Controllers found: 1
----------------------------------------------------------------------
Controller information
----------------------------------------------------------------------
 Controller Status : Optimal
 Channel description : SAS/SATA
 Controller Model : Adaptec 6405E
 Controller Serial Number : 3A18131A5E8
 Physical Slot : 17
 Temperature : 46 C/ 114 F (Normal)
 Installed memory : 128 MB
 Copyback : Disabled
 Background consistency check : Disabled
 Automatic Failover : Enabled
 Global task priority : High
 Performance Mode : Default/Dynamic
 Stayawake period : Disabled
 Spinup limit internal drives : 0
 Spinup limit external drives : 0
 Defunct disk drive count : 0
 Logical devices/Failed/Degraded : 1/0/0
 NCQ status : Enabled
 Statistics data collection mode : Enabled
 --------------------------------------------------------
 Controller Version Information
 --------------------------------------------------------
 BIOS : 5.2-0 (19109)
 Firmware : 5.2-0 (19109)
 Driver : 1.1-7 (28000)
 Boot Flash : 5.2-0 (19109)

----------------------------------------------------------------------
Logical device information
----------------------------------------------------------------------
Logical device number 0
 Logical device name : raid1
 RAID level : 1
 Status of logical device : Optimal
 Size : 953334 MB
 Read-cache mode : Enabled
 Write-cache mode : Enabled (write-back)
 Write-cache setting : Enabled (write-back)
 Partitioned : Yes
 Protected by Hot-Spare : No
 Bootable : Yes
 Failed stripes : No
 Power settings : Disabled
 --------------------------------------------------------
 Logical device segment information
 --------------------------------------------------------
 Segment 0 : Present (Controller:1,Connector:0,Device:0) Z1W02SAT00009328CL3A
 Segment 1 : Present (Controller:1,Connector:0,Device:1) Z1W02R50000093320P1A


----------------------------------------------------------------------
Physical Device information
----------------------------------------------------------------------
 Device #0
 Device is a Hard drive
 State : Online
 Supported : Yes
 Transfer Speed : SAS 6.0 Gb/s
 Reported Channel,Device(T:L) : 0,0(0:0)
 Reported Location : Connector 0, Device 0
 Vendor : SEAGATE
 Model : ST1000NM0023
 Firmware : A001
 Serial number : Z1W02SAT00009328CL3A
 World-wide name : 5000C5005641A66C
 Size : 953869 MB
 Write Cache : Enabled (write-back)
 FRU : None
 S.M.A.R.T. : No
 S.M.A.R.T. warnings : 0
 Power State : Full rpm
 Supported Power States : Full rpm,Powered off
 Device #1
 Device is a Hard drive
 State : Online
 Supported : Yes
 Transfer Speed : SAS 6.0 Gb/s
 Reported Channel,Device(T:L) : 0,1(1:0)
 Reported Location : Connector 0, Device 1
 Vendor : SEAGATE
 Model : ST1000NM0023
 Firmware : A001
 Serial number : Z1W02R50000093320P1A
 World-wide name : 5000C5005641D3F8
 Size : 953869 MB
 Write Cache : Enabled (write-back)
 FRU : None
 S.M.A.R.T. : No
 S.M.A.R.T. warnings : 0
 Power State : Full rpm
 Supported Power States : Full rpm,Powered off


Command completed successfully

 

No hay comentarios

Agregar comentario